Teradek Bolt XT 500 Kit | Wireless Video

$140.00 + GST

Kit Includes

1 x Teradek Bolt LT 500 Transmitter

1 x Teradek Bolt LT 500 Reciever

1 x Hard Case

From:
To:

Important: You can change the rent dates for other materials that you want to rent in the cart!

SKU: 1900 Categories: ,

Description

The Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set includes one transmitter and one receiver. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero-latency transmitter/receiver pair features a 500′ line-of-site transmission distance. You can send and receive visually lossless 3G-video signals from a Bolt 500 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor. The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, as well as 480i and 576i, only HDMI supports 480p and 576p. You can transmit up to three other 3rd-generation Bolt receivers as the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps keep your transmitted video safe from prying eyes.

 

Video Inputs
SDI: 1 x BNC (75 Ohm), 3G/HD/SD
HDMI: 1 x HDMI Type A Receptacle
Video Outputs
SDI: 1 x BNC (75 Ohm), 3G/HD/SD, Loop-Through
Color Sampling
SDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled)
HDMI: RGB 4:4:4, 8-Bit
Latency
<0.001 Seconds (TX to RX without Format Conversion)
Supported Resolutions
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
480i: 59.94
576i: 50
Video Processing
Compression
Visually Lossless

Color Correction
CDL/1024 1D LUT (Supports 10-Bit Color)
33x33x33 3D LUT (Supports 10-Bit Color)
Audio Compression
48 kHz, 24-bit PCM
Audio Input
Embedded
Interfaces
Switches: On/Off and Reset
Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows
USB Interface Functionality: Upgrade via Mini-USB
Wireless
Non-DFS FrequenciesUA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
EU & JP: 5.19 to 5.23 GHz
 

DFS Frequencies

US: 5.27 to 5.55 GHz and 5.67 GHz
EU & JP: 5.27 to 5.67 GHz
RF Power
17 dBm EIRP
Encryption
AES-128
Range
Up to 500′ / 152.4 m Line of Sight
Unicast Multicast
Unicast / Multicast
Noise Rejection
Can Coexist with Wi-Fi and 5 GHz Cordless Phones
Power Input
2-Pin Connector
7 to 17 VDC
Power Consumption
Nominal 7.3 W (Measured at 1080p60)
Operating Temperature
32 to 104°F / 0 to 40°C
Mountable
1 x 1/4″-20 Threaded Mounting Hole
2 x M3 Threaded Mounting Holes
Dimensions
0.95 x 2.6 x 4.47″ / 2.41 x 6.6 x 11.35 cm
Weight
8 oz / 226 g