Astera HydraPanel FP6

Description

Order Code
FP6
LED Engine
Titan LED Engine
Colors
RGBMintAmber
Total LED Power
25 W
LED Power Draw
17 W
Luminous Flux 3200K
1102 lm
Luminous Flux 4000K
1287 lm
Luminous Flux 5500K
1298 lm
Light Output 3200 K @ 1m
443 lx
Light Output 4000 K @ 1m
512 lx
Light Output 5500 K @ 1m
516 lx
CRI (Ra)/ TLCI 3200- 6500 K*
≥96
Beam Angle
110° x 100°
Field Angle
150° x 145°
Strobe
0 – 25 Hz
Pixels
6
Battery Runtime
up to 20 hours
Battery Runtime Max Brightness
1h 45min
Battery Lifetime
70 % after 300 cycles
Charging Time (nominal)
3 hours
DC Input
24 VDC – 0.85 A
DC Connector
5.5 mm x 2.1 mm
AC Input
No
AC Connector
No
Wired DMX
Yes (via FP1-PWB/ FP3-DTL/ PWB-2-86)
CRMX Receiver
Built-in
BluetoothBridge BTB
Built-in
Wireless Protocols
CRMX, UHF, Bluetooth, WiFi
Wireless Range
CRMX/ UHF up to 300 m / 330 yds Bluetooth up to 3 m / 3.3 yds
Infrared Control
Yes
ControlSync
Yes
TouchSlider
Yes
Housing Material
Polymer & Metal
IP Rating unwired
IP65 (only with DC cover or wired)
IP Rating wired with PWB-CAB-5 m/-10 m/-15 m/-0.2 m
IP65
Ambient Operating Temperature
0 – 40 °C / 32 – 104 °F
Weight
604 g / 1.3 lbs
Dimensions L x W x D
166 mm x 85 mm x 43.5 mm / 6.53″ x 3.34″ x 1.71″
Mounting Options
2 x ColdShoe 3 x M5 thread 1 x SafetyWire Eyelet
*Typical value 
What’s in the Box
1 x HydraPanel (FP6)
1 x DiffusorSheet 100 (FP6-DS-100)
1 x GelHolder (FP6-GH)
1 x SoftFrame 100 (FP6-SF-100)
1 x Intensifier 80 (FP6-INT-80)
1 x EggCrate 40 (FP6-EGC-40)
1 x EggCrate 6 (FP6-EGC-60)
1 x FlexBase (FP6-FB)
1 x ConnectorPlate (FP6-CP)
1 x Babypin (AX-BBP-1/4)
2 x Waterproof Protection Cover for PixelBrick & HydraPanel (PB15-PLG)

RF Characteristics
Wireless Modules
Modulation
ERP (Transmitter)
Channel Count
EU: UHF***(863-870MHz)
FHSS
<25mW
47
USA: UHF (917-922.20MHz)
FHSS
<25mW
53
AUS: UHF (922.30-927.50MHz)
FHSS
<25mW
53
SGP: UHF (920.50-924.50MHz)
FHSS
<25mW
41
KOR: UHF (917.9-921.5MHz)
FHSS
<25mW
10
RUS: UHF (868.75-869.12MHz)
FHSS
<25mW
6
JPN: UHF (922.80-926.40MHz)
FHSS
<25mW
19
CRMX (2402-2480MHz)
FHSS
–
79
Bluetooth 5.0 LE (2402-2480MHz)
FHSS
10mW (BLE)
40
WiFi (2412-2472MHz)
DSSS, OFDM
100mW
13
***General allocation of frequencies for use by short-range radio applications Spectrum usage regulations:
Frequency range in MHz1)
Maximum equivalent radiant power (ERP)
Additional parameters / frequency access and interference mitigation techniques
865 – 868
25 mW
Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.
868,0 – 868,6
25 mW
Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.
868,7 – 869,2
25 mW
Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 0.1% can be used.
869,40 – 869,65
500 mW
Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 10% can be used.
869,7 – 870,0
25 mW
Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.
1) The use of adjacent frequency bands within this table as a single frequency band is permitted, provided that the specific conditions for each of these adjacent frequency bands are met. 2) „duty cycle“ means the ratio of Σ(Ton)/(Tobs) expressed as a percentage, where ‚Ton‘ is the ‚on-time‘ of a single transmitting device and ‚Tobs‘ is the observation period Ton is measured in an observation frequency band (Fobs). Unless otherwise specified in this general allocation, Tobs is a continuous period of one hour and Fobs is the applicable frequency band in this general allocation (table). 3) Frequency access and interference mitigation techniques shall be used whose performance level at least meets the essential requirements of Directive 2014/53/EU or the Radio Equipment Act (FuAG). Where relevant techniques are described in harmonised standards, the references of which have been published in the Official Journal of the European Union pursuant to Directive 2014/53/EU, or parts thereof, performance shall be ensured which is at least equivalent to those techniques.